塑料颗粒增加亮度，如果做的是新料还可以，国内有很多工厂造粒用的都是回料，那么用回料怎么才能像新料一样光亮呢，如果把再生料做的像新料一样甚至比新料还要光亮，那肯定是需要添加一些高档助剂，比如说塑料上专用的光亮剂RQT-G-1。

Plastic particles increase the brightness, if is new material can also, there are many domestic factories in granulation are feed back, then feed back how can like new material as bright, if the recycled materials do like new material as even brighter than the new material, it is need to add some high-grade additives for example, plastic brightener RQT-G-1 special.

第一使用瑞奇特光亮剂RQT-G-1，塑料颗粒中添加光亮剂是可以起到光亮的效果，最直接的方法是按照一定的比例与原料进行充分的搅拌均匀即可，添加量一般是1-2公斤左右，是效果做好的添加范围。

The first use of Ricky special brightener RQT-G-1, plastic particles added brightener can play a bright effect, the most direct way is to mix fully in accordance with a certain proportion of raw materials, adding amount is about 1-2 kilograms, is the effect good add range.

第二添加多功能环保增塑剂RQT-P-1，这款产品是一种液体，它的好处是不会像粉末助剂一样荡起来，从效果上来讲是做的一种油亮油亮的那种效果，比较明显。一般的用量是一吨物料添加3公斤左右，而且成本比较低。并且它可以溶于各种有机物，在塑料熔炉里面可以增加产品的流动性能，可以让其他的助剂产品达到一个很好的相容性，降低塑料在挤出时的温度，增加产品表面亮度和韧性。

Second add multifunctional environmental protection plasticizer RQT-P-1, this product is a liquid, its advantage is not like powder additives like swing up, from the effect of speaking is a kind of shiny shiny effect, more obvious. The general dosage is one ton material, adds 3 kilograms or so, moreover the cost is quite low. And it can be soluble in various organic compounds, can increase the fluidity of products in plastic pot inside, can make other auxiliary products to achieve a good compatibility, reduce the temperature in plastic extrusion, increase the surface brightness and toughness of products.