| 镀镍光亮剂的配制 |
| 添加时间：2018/9/25 17:39:05 浏览次数： |
| 镀镍中间体： Nickel plated intermediate: 性状：淡黄色透明液体，PH3-4。 Character: pale yellow transparent liquid, PH3-4. 含量：≥98% Content: more than 98% 比重：1.22 Specific gravity: 1.22 建议光剂添加量150ml/L。 It is suggested that the dosage of light agent 150ml/L. 消耗量:50-100ml/KAH， Consumption: 50-100ml/KAH. 用途：PPF为镀镍超强纳米整平剂。 Purpose: PPF is a nickel plated super nano leveling agent. EX9； EX9; 性状：灰白色粉末。 Character: grayish white powder. 含量：≥98% Content: more than 98% 添加量：50~200g/L，建议柔软剂添加量100g/L。 Dosage: 50~200g/L, softening agent 100g/L is recommended. 消耗量:60-100ml/KAH， Consumption: 60-100ml/KAH. 用途：镀镍超强走位剂。 Purpose: nickel plated super strength agent. 柔软剂直接使用EX9和糖精配置即可。可以不必再添加PS；ALS等，当然也可以和ALS、PS等配合使用。降低柔软剂的配制成本，EX9不含低价硫，加多了不影响套铬，也不会消光。镀层走位效果对比明显增强。与PPF搭配可以配出几乎没有低区效果的镍光亮剂。 Softeners directly use EX9 and saccharin configuration. You can no longer add PS, ALS, etc., of course, can also be used with ALS, PS and so on. Reduce the cost of softening agent preparation, EX9 does not contain low sulfur, adding more does not affect the set of chromium, nor will it fade. The contrast effect of the coating is obviously enhanced. Matching with PPF can produce almost no low area nickel brighteners. 柔软剂参考配方；； Softening agent reference formula; 糖精；200g/L Saccharin; 200g/L EX9; 100g/L EX9; 100g/L |
| 上一页 油漆光亮剂选择标准 |
| 下一页 塑料光亮剂的应用 |
Copyright © 技术支持：遨游网络