| 浸塑制品还是要用专门的浸塑光亮剂才是王道 |
| 添加时间：2019/10/31 14:09:54 浏览次数： |
| 一般市面上用的光亮剂都比较廉价，这种廉价的光亮剂其实就是各种含量的氯化石蜡，氯化石蜡的作用其实就是类似给塑料打蜡，让塑料看起来油油的，比较亮，而且价格也是非常的低廉。 Generally, the brighteners used in the market are relatively cheap. This cheap brightener is actually all kinds of content of chlorinated paraffin. The function of chlorinated paraffin is similar to waxing plastics, making them look like oil, brighter and very cheap. 但是缺点也是非常的明显，那就是氯化石蜡耐候性非常的差，其实说白了也就是蜡的一种，温度较高的情况下蜡就非常的容易融化，溶化后不仅不能起到效果，还会影响产品的质量。 But the disadvantage is also very obvious, that is, the weatherability of chlorinated paraffin is very poor. In fact, it is also a kind of wax. When the temperature is high, the wax is very easy to melt. After melting, not only the effect can not be achieved, but also the product quality will be affected. 具体的表现就是有时候浸塑制品会表面黏黏的，那就是溶化后的蜡。如果沾到一些，会很难清理的。所以，浸塑制品还是要用专门的浸塑光亮剂才是王道。 The specific performance is that sometimes the surface of the soaked products will be sticky, that is, the melted wax. If you get some, it will be difficult to clean up. Therefore, dip plastic products or to use a special dip plastic brightener is the king. |
| 上一页 光亮剂的使用范围要宽 |
| 下一页 塑料光亮剂具有润滑性 |
Copyright © 技术支持：遨游网络